6 Paint Problems and How to Solve Them in Washington, MI

We must keep our home interior in tip-top shape since our home is technically the space we live in.

While there’s so much you can do to maintain the overall aesthetic of your home, in time, they just naturally show signs of wear – and these could manifest in many forms and signs.

One of the things that could show wear and tear over time would be your interior paint, and many factors lead to various paint problems – it can either be a naturally declining life cycle or just straight up a bad paint job.

So, if you’re currently looking for tips on how to solve your paint problems because they keep on bothering you (well, because they’re not exactly a good sight to see), you’ve come to the right place.

Without further ado, here are 6 Paint Problems and How to Solve Them in Washington, MI.

1. Cracking

One of the most common paint problems people encounter is paint cracks.

Characterized by the splitting of the dry paint layer through one coat, paint cracking happens when you’ve applied the second coat of paint too fast, not even giving the first coat enough time to dry completely.

Additionally, paint cracking could also happen when you have spread a coat of paint too thin, and it may have dried too fast.

THE FIX: To solve this problem, you’ll need to remove the paint completely, sand down the surface, apply a coat of primer then repaint.

Painting over the cracks may seem to be a faster solution, but doing this will only result in uneven texture and surface.

2. Cissing

When you see lines of unpainted surface on your newly painted wall, then this might be a pesky case of paint cissing.

Cissing happens when you paint over a contaminated surface, usually containing wax, oil, or polish.

The presence of these will result to paint not properly adhering to the surface, resulting in these unpainted areas that manifest as those lines that are not fully covered by the paint.

Additionally, paint cissing can also happen when there is contamination on your brush.

THE FIX: If you’re experiencing paint cissing, you should let the area dry first before doing any intervention on it.

When it is completely dry, you need to rub down the paint using wet and dry abrasive paper and warm water mixed with a detergent solution.

Before repainting over the surface, make sure your walls are completely rinsed and dry.

3. Chalking

If you’re seeing powder formation on your walls, this may be a case of paint chalking.

Paint chalking happens when you use low-quality paint that has high levels of pigment extenders, which manifests into these loosely-based powder forming in your walls.

Additionally, paint that contains a large amount of tint or is very bright tends to get chalky faster.

If the paint is thinned out too much, this could result in paint chalking.

THE FIX: You’ll need to scrape the loose paint and repaint the area.

Make sure to apply a coat of primer first and use high-quality paint, especially using bright colors, and spread using the recommended thinning rate.

4. Blistering

If you have been observing bubbles forming on the surface of your walls, this may be a case of paint blistering.

Blistering is caused by moisture crawling out of the painted surface and could also happen when you’re painting on a damp surface.

Additionally, it can also happen when you’re painting under high humidity or when you’re generally unprepared for a paint project.

THE FIX: Try to scrape down and repaint the affected area when extreme humidity is not present.

It would help if you also gave your coat of paint enough time to dry before applying another coat.

Additionally, you should also make sure that you’re painting on a dry surface to minimize the chance of moisture being drawn out.

5. Mould Growth

Mold growth is unmistakable to spot – they are black, grey, brown, or green spots growing on your surface, and they are just nasty to see.

This could happen to areas with high moisture, improper ventilation, and lack of sunlight.

Additionally, using low-quality paint that contains little to no bacteria shield will increase the risk of mold growth.

THE FIX: Make a white vinegar solution and scrub it on the affected area to kill the mold spore.

If you’re planning just to repaint the whole area entirely to prevent any regrowth, you should look into buying a stain-blocking primer and avoid getting low-quality paint.

Additionally, it would help to install exhaust fans to increase ventilation in the affected area.

6. Peeling

Lastly, another very common paint problem would be paint peeling.

Just like how it is named, it is characterized by paint peeling off from the surface and could be caused by loss of adhesion, high moisture, or painting on a dirty and dusty wall.

THE FIX: Scrape the peeling paint off, and smooth out the surface by sanding.

Apply a coat of primer first before repainting the affected area.

Make sure to use high-quality paint to reduce the risk of paint not adhering properly to the surface.

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

Residential Painting: What to do with Peeling and Blistering Paint