7 Tips For Painting Your Bathroom in Rochester, MI

Your bathroom is a place where you can be alone for a while and self-actualize while taking a shower.

But what’s bothersome is the paint peeling off due to longevity and the accumulated dirt on the walls.

It also conveys neglect of the owner as guests visit your house and take a step in the bathroom.

If you’re planning on getting a DIY makeover for your bathroom, here are 7 tips for painting your bathroom in Rochester, MI.

1. Take Your Time to Plan and Prepare

This is the first tip among the seven as this is the most important of them all.

You don’t want to stop in the middle of the project just to go out to the hardware store.

In addition to this, you do not want to waste your time cleaning up drips on fixtures.

Doing a DIY project is exciting but take your time to prepare all the necessary tools beforehand.

2. Cover All Hardware, Plumbing, and Porcelains or Ceramics

It is important to cover up the faucet, plumbing lines under the toilet, and the shower area.

Drape them with a tarp or a cloth to avoid the paint from splashing and dripping all over them.

You should also use painter’s tape to keep the sheets in place and cover areas in general.

There are also areas wherein it will be necessary to uninstall or remove furniture and fixtures.

3. Clean the Surface to be Painted

The bathroom walls are more likely to get wet so dirt, grimes, and soap can easily accumulate.

With this said, these substances can cause the paint to peel off eventually without cleaning.

And most probably, the paint won’t stick at all no matter how hard you try.

You can use chemicals such as Trisodium phosphate to get rid of the gunk and scum.

Once cleaned, you can easily start painting your bathroom without worrying about the paint peeling off eventually.

4. Use The Best Paint For Your Bathroom

Bathroom paint is designed particularly for the bathroom walls, ceilings, and floor if not tiled.

The paint has mold-inhibiting and water resistance agents that contribute to the durability of the work.

Paint with a higher sheen is quite expensive but can withstand more moisture, thus more durability and longevity.

5. Calculate How Much Paint You Need

As mentioned earlier, you do not want to stop in the middle of the painting job just to buy more gallons of paint.

If you’re planning on painting your bathroom, you should calculate first how much paint you need.

You can use online tools or apps that can easily calculate how much paint you need, and it’s free.

Give an allowance for excess paint than the calculated to save time and effort going to the store.

6. Follow the Cutting-Roller Steps

It is better to start cutting on the edges of the wall or against the painter’s tape.

Use a sash brush to paint against the painter’s mask to provide a more even finish.

If you’re planning to paint the ceiling, start at it before moving on to the wall.

You don’t want to mess up the walls once you’re done with them and move to the ceiling part.

Once done with the cuts, you can easily hover and roll the paint all over the surface.

You should paint over in 3×3 size by portion, then move on to the next area of the surface.

7. Second Coating

To achieve better results, you should apply a second coating on the dried painted areas.

Allow the first coat to dry up for at least two to three hours and repeat tip#6.

A second coat gives your wall a smoother finish, thicker protection from moisture, and better paint durability.

Once you’re done painting your bathroom, you can remove the covers on all the obstructions.

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

5 Tips For Resurfacing Your Bathroom Cabinets in Washington, MI