5 Tips For Resurfacing Your Bathroom Cabinets in Washington, MI

If your bathroom cabinet looks a bit outdated, you might want to consider resurfacing it to give it a new look.

Buying a replacement can be quite expensive and not practical at all especially if you can still utilize your existing cabinet. 

Here are 5 tips for resurfacing your bathroom cabinets in Washington, MI.

1. Repair Your Bathroom Cabinet

Before you start resurfacing your bathroom cabinet, you should make sure if there is any problem that needs to be fixed.

Check if there are any cracks or scratches in your bathroom cabinet — these are common problems that you need to repair.

Resurfacing your bathroom cabinet can’t solve structural problems, so you should do any necessary repairs that might get in your way.

2. Resurfacing Materials

There are a lot of materials that you can use to update the appearance of your bathroom cabinet when it comes to resurfacing it.

Here are 3 typically used resurfacing materials.

A. Wood Veneer

If you love the look of real wood, wood veneer is the right resurfacing material for your bathroom cabinet.

Wood veneer comes in sheets; it can be cut to fit the size of your cabinet.

To avoid scratches, use a cabinet-grade veneer when resurfacing your bathroom cabinet.

B. Rigid Thermofoil (RTF)

Rigid thermofoil (RTF) is the most affordable choice if you’re looking for something that will suit your budget.

It is a vinyl material that when applied with heat and pressure, can fit and be molded over your bathroom cabinet.

Unfortunately, it can be easily damaged by kitchen heat and discoloration might occur as you use it for a long period of time.

C. Install New Doors And Drawers

Some people are sometimes unhappy with their cabinets but at the same time don’t want to replace them.

If you’re like them, one option for you is to replace the doors and drawers of your bathroom cabinet.

It may be the most expensive type of resurfacing, but it will surely satisfy you.

3. Sand The Exterior Surfaces

You should remove all the doors, drawers, or anything that might get in the way as you sand the exterior surfaces of your bathroom cabinet.

After removing, lightly sand all the exterior surfaces with fine-grit sandpaper and wipe off any grease or oils on it. 

Instead of using a power sander that can possibly war openings, use a sanding block and 150-grit sandpaper.

4. Make Sure That You Cut Accurately

If you’re using a wood veneer as your resurfacing material, make sure to cut with extreme precision so that it will fit the surfaces of your bathroom cabinet.

Measure the exterior surfaces of the cabinet that will be covered with wood veneer cuts; this is a very important task in resurfacing your bathroom cabinet.

You might want to consider making a “cut list” — a list that contains all the exact measures and sizes of each wood veneer piece that is needed to cover your cabinet.

You should make accurate cuts so that the strips meet tightly; it would be quite troublesome if there’s excess wood after putting it on the surface of your cabinet.

5. You Should Be Patient

You should be extremely patient in doing this kind of job — you don’t need to rush between paints or varnish coats and let them dry completely.

The only way to have a smooth finish instead of a bumpy look is to lightly sand and wipe down between paints or varnish coats.

Take your time aligning the wood veneer to the cabinet properly because once it is pressed into your bathroom cabinet, it can’t be removed. 

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

Related: Resurfacing Your Cabinets in Harrison Twp MI: The Benefits

Transforming Melamine Kitchen Cabinets in Richmond, MI

7 Tricks To Renovating Your Living Room On A Budget in Romeo, MI

A living room is likely the most used area in the house where we usually relax, play with the kids, and entertain guests. There are many ways to make it beautiful that won’t cost you a lot.

Here are 7 tricks to renovating your living room on a budget in Romeo, MI.

1. Reenvision Your Layout

Sometimes, all it takes for your living room to have an entirely new look is a new layout and it will cost you nothing.

You can rearrange your furniture’s positions, or even switch the area of your living room to another room at home. 

A living room is typically centered around something like a television, so make it your starting point when renovating your living room.

2. Repaint Your Walls

Repainting your walls is one of the budget-friendly ways on making your living room a better place to stay.

Whether you’re thinking of repainting all the walls or customize it by painting your artwork, it will definitely have a huge impact.

You’ll want to choose a paint color that will give off good vibes, especially that we’re talking about living rooms — staying here should make you feel comfortable.

3. Redoing Your Floor

Redoing your floor doesn’t have to be costly, but if you have a less-than-desirable carpet or cracked and broken tiles, consider having a new floor finish.

Carpet can be replaced without spending much, as for the floor finish materials, there are a lot of options that are cost-effective but will surely be within your budget.

Modern floor finishes are quite advantageous since they can be installed on top of an existing tile, making it an easy and mess-free task.

4. Put Some House Plants

While there are different living room design ideas out there, but plants are the ones that will literally give life to your space.

Some plants can be quite expensive, fortunately, there are a lot of plants that are low-cost yet a lot more attractive.

Having plants to look at while you’re relaxing in your living room gives such a soothing feeling that will somewhat relieve you from stress, especially for our hardworking moms out there.

5. Make A Gallery Wall

Gallery walls, also known as photo walls, have become a  popular way to update your living room over the past few years.

Not only does it give you something wonderful to look at instead of a blank wall, but it also brings character and personality to your living room.

For those who are tight on a budget, instead of repainting the walls of your living room, or putting wallpapers to cover-up some minor damages, you can make a gallery wall.

6. Check Your Lighting

Sometimes, we overlook the lighting of the house which is a significant factor to consider in creating the overall appearance of your living room.

A good way to add a relaxed ambiance and mood is excellent lighting, and a few well-arranged tables and floor lamps will give elegance to your living room.

You can also use picture lights to highlight an artwork or a gallery wall, and by putting a new chandelier for your central light, you can give your living room an exquisite look.

7. Put Accessories In Your Living Room

Accessories are the easiest and fastest way to refresh your living room and make it more lively than the way it is now. 

What you want to do is to buy a nice-looking comfy pillow with the latest trends; it will not cost you much but it will ensure you that your living room looks lovely.

Another way to make your living room more attractive is by placing rugs or a floor covering with an appealing design.

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

Related: 8 Improvements For Your Living Room In Clinton Township, MI

Interior Painting, Richmond, MI: Color and Decoration Ideas for Each Room

7 Mistakes To Avoid While Painting Your Ceiling in Washington, MI

When you have an interior painting project that you are considering, such as painting the walls of your living room, you may not even realize how long it has been since you have painted your ceiling.

Though it’s often a good idea to paint your ceiling around the same time, the issue is that making even one of a number of fundamental mistakes in the process can not only make it cost more but also delay is substantial.

With that being the case, let’s look at seven mistakes to avoid while painting your ceiling in Washington, MI.

1. Not Planning The Ceiling Painting

Quite possibly one of the biggest mistakes that you can make when you are getting ready to paint is to just dive right into it and start painting without taking the time to plan it out first.

There are many reasons you should plan out a painting project before you start it but one of the most important ones is that you will know how long it’s going to take to paint, which will mean that you can plan the time that you paint as well.

2. Using The Wrong Paint

A person might think that they could just walk into a paint store and get some paint and just start painting their ceiling, but some care has to be put into the selection.

If you choose a good paint that is flat, you will be much less likely to see major drips (but of course this does not mean that you shouldn’t protect your floors when using this kind of paint) and it’s going to look a lot better on your ceiling.

3. Not Sanding Before Painting

There are many ways that you can prepare your ceiling before you paint it but one important step that you should not skip is the sanding of the surface that is going to be painted.

The reason that this is the case is that sanding the surface that is to be painted gets it smoother and as such makes it easier to paint.

Instead of having a struggle getting the primer and the paint on the surface, you will have an easier time.

4. Not Letting Your Paint Dry

There are few things that are as dull as seeing paint dry — it is for this reason that you hear people talking about how dull it is to do so.

Nevertheless, it is something that needs to be done (even if you’re not watching) because if you don’t allow enough time for your paint to dry, you will find that bits of the paint picked up on the paintbrush when you go to paint another coat.

This can also be the case when you apply the primer — you need to wait for the primer coat to dry before you apply paint.

5. Using Makeshift Scaffolding

In the course of painting your ceiling, you will have to make sure that you can access the ceiling — which means that you bring yourself up to the ceiling or somehow — and if you think this means that you just put a plank on a couple of large piles of bricks, you are mistaken.

Indeed, this is incredibly difficult to move around your space being painted and is a bit on the dangerous side compared to a portable ladder.

6. Being Stuck On Only One Color

There are many colors that you can find in the world of interior painting, and so many of them work well with painting your ceiling.

You don’t need to limit yourself to painting your ceiling only one color — white, that is.

7. Leaving The Lid Off The Paint Can

Lastly, there’s one mistake that people will often make in the process of painting their ceiling is to leave the lid off of their paint can.

This can cause numerous problems, including crust forming on your paint in the can as well as the distinct possibility that you might just step on the lid while you are painting.

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

Related: Interior Painting Shelby Township: Pro Ceiling Painting Tips
7 Tips For Inspecting Interior Paint Work in Romeo, MI
Interior Painting Washington, MI: How to Combine White with Other Colors

7 Tips For Inspecting Interior Paint Work in Romeo, MI

When you have just completed having interior paintwork done (whether you have done it or had someone do it for you) it is a good idea to inspect the completed interior paintwork.

This is something that can also come up if you move into a house – it’s good to check the interior paintwork before you fully move in to make sure that there aren’t things that need to be done to update the interior paintwork.

With this being the case, here are seven tips for inspecting interior paintwork in Romeo, MI

1. Move From One Side Of The Room To The Other

The first thing you are going to want to bear in mind when you are inspecting the interior paintwork in a room is that the best way to do it is to move from one side of the room to the other.

Though this seems like a fairly intuitive idea, it is not widely done and some might want to just go around the room in a semi-arbitrary manner checking things one at a time.

It’s a more time effective thing to start on one side of the room and move your way to the other, checking it all carefully.

2. Mark Things With Tape If The Painter Will Return

If you are working with a painter and want to more easily communicate with them when you’ve found something that needs correction, a bit of painter’s tape might be just the thing to do the job.

Rather than try to communicate with the painter what needs to be fixed, you mark off the sections with tape and then explain what the bits of tape all represent.

3. Check For Dents And Holes

An important part of the inspection of the paintwork is to see if there are any dents or holes that need to be addressed.

This is of course not to say that the dents were caused by the painting process, but rather that they were already there and they were overlooked in painting.

4. Inspect The Intersections

Another key thing to do when you are inspecting interior paintwork is to check out all of the various intersections where paint should end and either another color be present or just no longer be there.

These can be intersections like where the ceiling meets the walls and the like.

You aren’t going to want to see things like wall paint on the ceiling, or paint from the cabinets on the wall — rather the lines should be clean.

5. Window Caulking Should Be Properly Done

There are a number of ways that you can err when you are caulking a window — you might put on the caulking too thick, or not apply enough.

If you find that there are issues with any of these, it is likely that the caulking is just going to have to be redone or at least partially corrected.

6. How To Inspect Baseboards

The baseboards are a fairly important part of your interior, and after an interior paint job, you are going to want to check them out to make sure that all was done correctly with them.

Seeing nails popping out of the baseboards, for example, is a sign that errors were made with the interior paintwork — you should see just the baseboards, and to see them as being smoothly painted.

7. Smooth Is Important

Lastly, you should make sure that your paintwork is smooth — it will be an indication that the surfaces were properly prepared prior to the painting.

These things can be simple, like sanding before painting, or even the use of primer that also be used prior to painting.

If you need professional help with your bathroom repainting and refinishing project, our highly skilled and experienced team at Eason Painting can help.

We have years of experience offering residential painting services in Macomb Township, Washington Township, Ray Township, Rochester, Rochester Hills, Romeo, Armada, Troy, Shelby Township, Harrison Township, Chesterfield, and Clinton Township, MI.
Call us today at 586-465-5081 for a FREE painting estimate.

Related: Interior Painting, Richmond, MI: Color and Decoration Ideas for Each Room
Interior Painting Washington, MI: How to Combine White with Other Colors
Interior Painting Rochester, MI: Bathroom Paint Color Ideas