Common Paint Problems And How To Prevent Them in Washington, MI

Have you been having trouble resolving the paint problems in your home?

Fret not, because here’s a guide to help you with that!

Without further ado, here’s a list of Common Paint Problems And How To Prevent Them.

1. Uneven Coverage and Streaks

If you’re seeing raised bumps, streaks, or just spots that weren’t properly covered with paint, then your coat of paint must be suffering from uneven coverage and streaks.

Having uneven coverage and streaks on your coat of paint is just overall unsightly, and often forces you to revisit your project and apply multiple coats of paint, wasting time and resources.

So, to prevent this from happening, here are a few tips to know:

Proper Preparation: Before you start painting, ensure that the surface is clean and smooth. Sand any rough patches, fill in holes and cracks, and prime the surface if necessary. A well-prepared surface will allow the paint to adhere evenly.
Quality Tools: Invest in high-quality paintbrushes and rollers. Cheap, low-quality tools can leave streaks and uneven coverage. Choose the right type of brush or roller for the paint you’re using and the surface you’re painting.
Technique: When applying paint, use long, smooth strokes. Avoid overloading your brush or roller with paint, as excess paint can lead to streaks. Always maintain a wet edge, meaning that you should paint continuously without allowing the paint to dry in between sections.

2. Bubbling and Blistering

If you are seeing bubbles or blisters on your recently painted surface, or worse, a recently applied coat of paint, then these are clear signs of bubbling and blistering paint – which is a problem that is both as ugly as it is hassling.

This is caused by a few factors, including moisture issues, improper surface preparation, or using old paint.

So, here’s how you can avoid this:

Moisture Control: Moisture is a common culprit for bubbling and blistering. Ensure that the surface is completely dry before you start painting. Fix any leaks or moisture problems in the room to prevent future issues.
Surface Prep: Properly prepare the surface by sanding and priming it. This will help the paint adhere well and reduce the likelihood of bubbles forming under the paint.
Check Paint Age: Using old or expired paint can lead to bubbling and blistering. Always check the expiration date on your paint cans and avoid using paint that has gone bad.

3. Paint Drips and Runs

One of the most frustrating things about painting is drips and runs ruining your fresh coat of paint.

Just imagine applying a fresh coat, only for it to be immediately ruined by drips and runs that are just unsightly!

However, it’s a good thing that these are totally avoidable, using these tips:

Consistency: Ensure that your paint has the right consistency. If it’s too thick, you can add paint thinner to even it out. Mix it well to achieve a smooth and consistent texture.
Proper Loading: When using a brush or roller, load it with just enough paint to cover the surface without excessive dripping. Tap off any excess paint before applying it to the wall.
Technique: Start at the top of the wall and work your way down, using smooth, even strokes. This will help catch any drips or runs as you go along, preventing them from drying and ruining your finish.

4. Cracking and Peeling

If you have been seeing various parts of your surface with cracked or peeling paint, then it’s due time that you treat the whole thing with a fresh coat of paint.

A rather common and classic sign of paint, paint cracking and peeling often happens due to a lack of surface prep, a lack of primer usage, or using low-quality paint.

To avoid this, here are a few pointers to take:

Surface Inspection: Before painting, thoroughly inspect the surface for any existing cracks or peeling paint. Address these issues by scraping off loose paint and sanding the surface smooth.
Priming: Apply a high-quality primer before painting, especially on surfaces that have a history of cracking or peeling. Primer creates a strong bond between the surface and the paint, reducing the chances of future issues.
Quality Paint: Invest in premium-quality paint that is designed to withstand the conditions of the specific area you are painting. Cheaper paints are more prone to cracking and peeling.

5. Discoloration and Fading

Lastly, if you’re starting to notice that your coat of paint seems mundane or dull lately, it might have started to fade, or worse, has faded already.

Paint fading is a very common problem among households, and to avoid or stall this from happening, here are a few tips to take:

Quality Paint: Choose a high-quality paint that is resistant to fading and discoloration. Look for paint with UV protection if you are painting an area exposed to direct sunlight.
Proper Ventilation: Ensure that the painted area has proper ventilation to reduce humidity levels, which can contribute to discoloration. Use exhaust fans in bathrooms and kitchens to minimize moisture.
Regular Cleaning: Clean painted surfaces regularly to remove dust, dirt, and pollutants that can contribute to discoloration. Mild soap and water can help maintain the paint’s appearance.

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

Signs That You Need To Repaint Your Home Office in Rochester, MI