7 Tips for Power Washing Your Home Exterior in Romeo, MI.
Power washing is an easy way to remove dirt and grime on the surface of your home’s exterior.
If you’re planning to revamp your home by applying a fresh coat of paint, it’s also a good way to prepare your exterior for it.
No proper knowledge about power washing can ruin the look of your home, or even cause serious damage to it.
Here are 7 tips for power washing your home exterior in Romeo, MI.
1. Check for Imperfections
The first thing that you should do to get started is to check for imperfections on the exterior of your home.
Carry out a thorough inspection to see if there are any damages that need to be repaired on your exterior’s surface.
It is very important to fix even small damages as it can get worse when hit by your power washer.
2. Buy Your Tools
You may think that power washing home exterior is only for the professionals to handle, but it’s actually a job that most DIYers can do.
If you’re planning to do it yourself, you’ll be needing some tools to get started with your home exterior power washing project.
These tools include a hose, cleaning detergent or chemicals, drop cloths, and of course, a power washer.
Take your time learning how to set up your power washer and how to use it properly as it can possibly damage your home if used incorrectly.
3. Wear Personal Protective Equipment
When power washing your home’s exterior, you usually combine the water with cleaning solutions or chemicals for better results.
Wearing personal protective equipment is always a good idea to protect yourself from getting exposed to these chemicals that may be harmful to you.
Personal protective equipment for power washing includes gloves, safety boots, protective goggles, and full-body suits.
In case you don’t have any full-body suit, you can wear long sleeves and pants as an alternative.
4. Protect Your Plants, Vehicles, etc.
Power washing the exterior of your home can be quite messy, and the chemicals are not only harmful to you, but to the plants as well.
Before you start power washing, make sure to cover your plants, vehicles, and other things that can get caught up in your work.
If you don’t want to cover your plants, you can at least spray some water on them before anything else.
Dry leaves can absorb more water compared to wet ones, so watering your plants before power washing can give them a bit of protection.
5. Do Necessary Prep Works
Prepare your working area by closing all the doors and windows, and turning off the power to your external electrical outlets.
These electrical outlets can be quite dangerous when wet, so make sure to cover them with plastic and tape to prevent the water from going inside.
Once you’re done, test your power washer on an unnoticeable part of your exterior to determine the proper setting that won’t damage your home.
6. Check the Type of Paint on Your Exterior
Before you start power washing, make sure that your home’s exterior isn’t covered in lead paint.
Applying high pressure to lead paint can break it up and spread it into pieces which can be dangerous for your family’s health.
Avoid possible danger to you and your family’s health by checking the type of paint on your exterior, or call for a professional to do the inspection.
7. Up and Down Power Washing
Most people just start power washing their home exterior without any plan or anything that can guide them.
To make your home exterior power washing job more effective, one tip is to do it in an up and down manner.
You should also know what area to prioritize to make your job more systematic which can save you a lot of time.
If you need professional help with your interior painting project, Eason Painting can help.
Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.
Call us today at 586-465-5081 for a FREE painting estimate.