7 Tips For Preparing Your Deck For Staining in Romeo, MI

Keeping your deck good-looking and nice is a tough job and can be very challenging due to many damaging factors.

But one of the best ways to make it strong and beautiful is through staining, but you should have knowledge about how you will make it right.

With that in mind, here are the 7 Tips For Preparing Your Deck For Staining in Romeo, MI.

1. Make Some Thorough Preparation

Preparation is the key to get optimal final results, therefore planning should involve how your project will be done accordingly and appropriately.

All wood whether it is brand new or older decks should be cleaned extensively before staining.

Because if you left the woods uncleaned, the tendency is that the stain will not properly penetrate the wood pores.

One of the best ways to prep your deck for staining is using an oxygen bleach cleaner which is very gentle and effective.

2. Inspect Your Decks For Any Damages

Before you proceed with the staining process, it’s important to check for loose nails and screws, as well as irregularities in the wood.

If you find any damages, repair them such as for loose screws you may replace them with a new one.

Or if you notice large dents, you may apply epoxy putty to the spaces then sand it to make it smoother.

3. Apply Brighteners

In the deck staining process, applying brighteners is one of the best and easiest steps to consider.

Wood brightener works by opening up the surface of the wood which improves penetration and neutralizes any stain strippers and restores the appearance.

Using wood brighteners is very easy, you will only use spray and wait for few minutes before rinsing them off.

4. Choose Quality Products

Before you decide which stain to buy, it’s better that you choose products that will offer long-lasting results.

High-quality staining products are much more expensive than others but it assures you that premium result.

These quality stains differ in terms of resins, pigments, mildew ides, and many other materials that make up a gallon of wood stain.

Moreover, you may ask help with local hardware or paint stores which stain products are the best for decks.

5. Give Time Covering Things Up

In having a DIY project, it’s essential that you protect other materials that are not involved with your work.

One example of the things you should cover-up is the home’s siding, aluminum spindles, and around doors.

Consider using a drop cloth or plastic to protect them so they will not be ruined in the staining process.

6. Use Paint Brush In Staining

There are varied ways to apply stains, you may opt to use a pump-up garden sprayer and roller. But regardless of how you apply your wood stain, always keep a paintbrush on your tools.

A paintbrush will work the stain deep into the pores of a board, causing the wood to absorb more stain.

That’s why if you’re using a spray or roller to stain, always back-brush for better penetration into the wood.

Also, you must keep in mind to follow the manufacturer’s directions for stain application, and check for weather updates so your work will not be interrupted.

7. Let The Stain To Completely Dry

After all your tiring project of staining, give some ample time for your decks to dry out.

Don’t take it in a hurry, because at the end of the day you will be able to see the fruits of your hard work.

So make sure to wait at least 24 hours before you return all the furniture on your deck so you will not ruin your work.

If you need professional help with your interior painting project, Eason Painting can help.

Our home interior painting services are available in Washington Township, Rochester, Romeo, Shelby Township, Harrison Township, and Clinton Township, MI.

Call us today at 586-465-5081 for a FREE painting estimate.

Related: 7 Ways To Update The Look Of Your Home’s Exterior in Rochester, MI

7 Mistakes to Avoid When Power Washing Your Home’s Exterior in Washington, MI